Altec Lansing - A6 Series

Below are all the different types of Altec Lansing. Select the device of your choice, to download the manual or user guide.

Click here to download the manual

Contents

1 Unpack the 8256X cabinet This cabi net is sealed at the factory do not attempt to take it apart or remove the back panel 2 Turn the cabinet so the short side with out fiberglass lining is up drill a hole in the top avoiding the diagnonal brace This hole should be just large enough to pass four wires through NOTE Do not drill this hole if the loud speaker is to be installed behind the screen in a motion picture theatre 3 The interconnecting wires are packed Locate the four longest wires one red wire one green wire two black wires 4 Unpack the two 3156 LF loudspeakers Attach a green and black wire to the terminals of one loudspeaker See Figure 2 5 Lay the 8256X cabinet on its back panel Mount one 3156 loudspeaker in one baf ...